DP to HDMI Fiber Optic Converter 1XLC multimode 500M pigtail Type Uncompressed 4K60

OPTAV OV11DH-1FO-012 DP to HDMI Fiber Optic Converter delivers lossless long-distance video transmission over single multimode fiber. Meanwhile, this compact pigtail transceiver relies on advanced SWDM single fiber technology to cut cabling costs for AV projects. In turn, it pushes uncompressed video bandwidth up to 21.6Gbps without signal compression or picture degradation. Besides, the hardware supports native DP 1.2 input and HDMI 2.0 output for cross-device compatibility. Therefore, this DP to HDMI Fiber Optic Converter fits graphic workstations, control rooms and exhibition screen layouts perfectly. Furthermore, it adopts true plug-and-play design to skip complicated driver setup for quick on-site deployment.

First of all, this DP to HDMI Fiber Optic Converter integrates built-in SWDM filter with 850/880/910nm wavelength coverage. Specifically, the SWDM VCSEL laser transmits full video signals through just one LC multimode fiber core. Next, it outputs native 4K×2K@60Hz video with complete YUV 4:4:4 color sampling. To be precise, the 21.6Gbps full bandwidth keeps every color detail intact with zero compression loss. On top of that, it eliminates lag, flicker and color shift common with copper cable extension. As a result, designers and operators view sharp, consistent UHD images across the full transmission range. Importantly, it locks seamless signal conversion between DP source devices and HDMI monitors. For this reason, it solves long-distance display matching troubles effectively.

When it comes to optical transmission capacity, this unit works exclusively with OM3 multimode fiber. Correspondingly, it achieves stable signal extension up to 500 meters for indoor cross-room wiring. Even better, the fixed 300mm LC pigtail removes extra fiber module installation steps. Meanwhile, single-fiber design reduces cable quantity and tidies up cabinet wiring spaces. In effect, fiber transmission fully blocks EMI and RFI interference from power supplies and industrial machinery. In turn, users avoid screen snow and signal dropouts in electrically complex environments.

In terms of structural design, both transmitter and receiver use slim black plastic housings sized 100×34×14mm. Moreover, the TX weighs 104g while the RX hits only 98g for easy hidden routing. For starters, each unit runs on standard 5V micro USB power with merely 1.4W power consumption. Equally, low power output cuts heat buildup and supports round-the-clock running. Additionally, the integrated pigtail avoids loose fiber port faults during frequent arrangement. Thereby, field teams finish wiring and signal testing within minutes without extra adapters.

Last but not least, this DP to HDMI Fiber Optic Converter maintains steady operation under varied temperature conditions. In particular, it works reliably from -10°C to 60°C for daily indoor AV use. In practice, it safely stores from -40°C to 85°C during transport or seasonal shutdowns. It also withstands 5–95% non-condensing relative humidity year-round. Consequently, operators skip extra cooling or heating gear for equipment closets and monitoring stations.

---

Features

• SWDM Single Fiber Technology.
• Maximum resolution up to 3840*2160@60Hz(4:4:4).
• Support 4K*2K@60HZ(4:4:4).
• Extension distance up to 500 meters.
• 1 LC connector, support MM fiber.
• Uncompressed video up to 21.6Gb/s data rate.
• Plug and play.

---

Specification

	Transmitter	Receiver
DP compliance	DP1.2/HDMI2.0
Video Bandwidth	21.6Gbps
Distance	Multi-mode fiber: 500M
Supporting Resolution	4Kx2K@60HZ
Connector/Fiber	DP(male)/HDMI(male)/ LC
CWDM filter	Integrated 1270nm/1290nm/1310nm /1330nm/1490nm/1550nm filter
Power Supply	5V/1A
Power Consumption	1.4W	1.4W
Color	Black	Black
Dimension(LxWxH)	Model: 100x34x14 (mm)	Model: 100x34x14 (mm)
	Pigtail: 300 (mm)
Weight	Model: 104g	Model: 98g
	Package：250 g
Environment	Operating Temperature Range:  -10°C~60°C Storage Temperature Range: -40°C~85°C
Relative Humidity	5-95% RH (no condensation)

---